Blog - Page 4 of 4 - Associated Broadcast Consultants

DAB Radio The purpose of this article is to give a reasonable audio quality comparison of uncompressed PCM audio, DAB, DAB+, FM and AM. The broadcast formats were simulated in the manner described in the following methodology – whilst not quite as good�as using full�transmission modulation and demodulation chains, it is hoped that these simulations are “good enough” for comparison purposes.

Photo by�bods

Audio Comparison Methodology

First of all a sample of music was ripped from CD using dB PowerAmp software and saved as 16bit PCM Wav file – ie uncompressed audio. Then copies of this file were processed as following to simulate the various transmission formats:

DAB – file converted to MP2 with three formats using dB PowerAmp software. Formats selected were 80kbps Stereo, 80kbps Mono and 128kbps Stereo. These files were then converted back to PCM wav files for compatability reasons
DAB+ – file converted to AAC HE v2 (which we call AAC+). Formats selected were 56kbps Stereo, 32kbps Stereo, 16kbps Stereo�and 12kbps Stereo.�These files were then converted back to PCM wav files for compatability reasons
FM – File was band-limited to 15kHz. Another version also had audio processing applied using the “Broadcast” preset in the multi-band audio processor function of Adobe Audition 3.0
AM – File was processed using�AM simulator preset�on Reaper software

Associated Broadcast Consultants opinion is that 80kbps Stereo is inadequate quality, but becomes bearable at 80kbps Mono, albeit with total loss of stereo image. 128kbps MP2 seems to give a good approximation of FM quality both audibly and on the spectral charts. The AAC+ codec (used in DAB+) is remarkably good at lower bit rates – still acceptable at 32kbps, but becoming a bit “YouTubey” at 16kbps and horrible at 12kbps. �However we feel it still has “something missing” at 56kbps which is the highest bitrate possible for that codec (above that it becomes normal AAC). �Unsurprisingly AM sounds the worst, but this is probably exagerrated by the lack of proper AM audio processing which would make a professional AM broadcast sound much better.

Audio Quality Comparison files

The audio samples have been combined into one 6 minute comparison file. Ideally you should listen to the WAV file (123MB), but if you are in a rush and/or have poor broadband, the 320kbps MP3 file still clearly shows the difference in audio quality:-

WAV File (large – 123MB)

MP3 File (smaller – 14MB)

(Just click to play or Right click and file save or save target as to download the files)

Spectral Charts

To supplement listening tests, we also did screen captures of the audio spectrum of each file. This clearly shows the band limiting of the FM file. It also shows a surprisingly heavy band-limiting in the MP2 80kbps Stereo file (almost to AM quality). In contrast the 80kpbs mono MP2 file has much better audio spectrum, and this is clearly audible on the test file. The 12kbps AAC+ picture is interesting. �It appears to show aliasing – that is audio components between 0-4kHz are repeated from 4-8kHz and 8-12kHz. �This could be why it sounds so bad! It could be avoided by bandlimiting the audio to 4Khz before encoding. �We are not sure if this is a problem with the codec used, or a limitation of the AAC HE v2 codec specification.

Original Audio PCM WAV MP2 80kbps Stereo MP2 80kbps Mono FM Unprocessed FM Processed DAB+ (AAC+ or AAC HE V2) – 56kbps DAB+ (AAC+ or AAC HE V2) – 32kbps DAB+ (AAC+ or AAC HE V2) – 16kbps DAB+ (AAC+ or AAC HE V2) – 12kbps AM Europe (4.5kHz)